Is your Netgear WiFi range extender constantly flashing red? Has the performance of your device degraded because of this
Is your Netgear WiFi range extender constantly flashing red? Has the performance of your device degraded because of this? If the answer to both the questions is yes, then you’d be glad to know that we have the rightful ways through which you can get rid of the issue. Keep reading to know about the different troubleshooting steps that’ll help you fix the Netgear extender red light issue.
Power Cycle Your Netgear Nighthawk Extender
Yes, there are various ways through which you can resolve the red light issue. However, before you get down to the advanced troubleshooting steps, it is recommended that you try rebooting your device. If even after rebooting your device, the red light issue doesn’t leave you, then we won’t stop you from proceeding to the advanced steps.
Here are the instructions that you need to follow to reboot or power cycle your Netgear Nighthawk extender:
- Disconnect all the connected devices from your extender.
- Power off your extender and unplug it from the wall outlet.
- Wait for some time.
- Now, plug the extender into the socket, turn it on, perform Nighthawk login, and explore the settings of your device.
Rebooting your Netgear extender didn’t resolve the red light issue? Well, don’t go nuts yet! The below-mentioned steps can still help you out!
click here – Best tips to get a low-interest rate on your personal loan
Fixed: Netgear Extender Red Light Issue
Fix 1. Update the Firmware
To get rid of the extender red light issue, start by performing Netgear firmware update. Go through the steps mentioned below to update your Nighthawk device:
- Connect your extender and router with the help of a cable.
- Launch a web browser on your PC and log into your device.
- Once the Netgear Nighthawk setup wizard appears, go to Settings.
- Under Administration, look for the Firmware Update option.
- Once found, click on it.
After updating the firmware of your device, check whether the red light issue is fixed or not. No? Looks like you’ve got to do some more reading.
Fix 2. Cut the Space Between Your WiFi Devices
One of the major reasons why your extender is flashing red is because the distance between your WiFi devices is too much. Therefore, make sure that your extender and outer are placed next to each other. Also, ensure that they are connected via an Ethernet cable rather than a wireless source.
Fix 3. Call Your Internet Service Provider
If you’re still facing the red light issue, then chances are that your internet connection is working at a snail’s pace. Thus, make sure that your Netgear WiFi range extender has access to an uninterrupted internet connection. To be on the safer side, get in touch with your Internet Service Provider. If the issue is from his side, ask him to fix it as soon as possible.
click here – Serverwala – Best Dedicated Server Provider in Japan
Fix 4. Perform Factory Default Reset
If nothing worked in your favor so far, resetting your device to its factory default settings is the only thing left for you to try. But, before you reset your Nighthawk extender, know something – Resetting the device will restore it to its factory default settings. So, if you want to back up your important data, do it now!
Then, follow the guidelines outlined below to reset your Netgear Nighthawk device:
- Look for the Reset button located on your Netgear extender.
- Found? Perfect. Now, take an oil pin or any other pin-pointed object.
- Carefully press the Reset button.
Note: After resetting your WiFi device, don’t forget to perform Netgear extender setup from scratch.
The Bottom Line
Once you are done resetting your Netgear WiFi extender, check whether the red light issue has been resolved or not. If it has, then congratulations! Looks like this post worked wonders for you! We are glad that we could be of some help.
